Every number on WattPricer comes from a published formula and a public data source. This page explains both, so you can check our work.
Electricity prices
State electricity prices are the average residential price (cents per kWh) from the U.S. Energy Information Administration’s Electric Power Monthly, Table 5.6.A. EIA calculates it by dividing residential revenue by residential sales, so it includes most per-kWh charges but not every fixed fee. We check for new EIA data daily and update automatically. Current data month: August 2026; U.S. average 18.16¢/kWh.
Formulas
- Energy (kWh) = watts × hours ÷ 1,000
- Cost = kWh × price per kWh
- Monthly = yearly ÷ 12, where yearly = daily use × days per week × 52.14 weeks
- Amps (single-phase AC) = watts ÷ (volts × power factor); three-phase = watts ÷ (√3 × volts × power factor); DC = watts ÷ volts
- EV charging energy = miles × kWh per 100 mi ÷ 100 ÷ (1 − charging loss)
- Heating cost = heat needed (MMBtu) × fuel price per MMBtu ÷ system efficiency (AFUE for furnaces, COP for heat pumps); 1 kWh = 3,412 BTU, 1 therm = 100,000 BTU, 1 gallon of propane ≈ 91,500 BTU
Appliance wattages
Typical wattage ranges come from the U.S. Department of Energy’s Energy Saver guidance, published university extension tables (Penn State, Virginia Cooperative Extension), ENERGY STAR product data and manufacturer specifications. Older reference tables list nameplate maximums; where modern products run well below those, we say so on the appliance page. Your device’s label or a plug-in energy monitor will always be more accurate than a typical value.
Limitations
- Bills include fixed charges, taxes and riders that a per-kWh average cannot capture.
- Time-of-use, tiered and deregulated retail plans can make your price very different from the state average.
- Appliances with thermostats or compressors cycle on and off, so hours of actual running time matter more than hours switched on.
Found an error? Let us know through the contact page and we will correct it.